Upcoming Sensors

Pyranometer

Pyranometer is usually used to determine global solar radiation (a combination of direct and diffuse solar radiation). This product is ideal for agricultural, meteorological, solar energy and environmental research.

 

Key Features:

  • Sensitivity: 75 µA per 1000 Wm-2
  • Linearity: maximum deviation 1% up to 3000 Wm-2
  • Cosine correction: Cosine corrected up to 82° angle of incidence

Sonic Anemometer 3D

A 3D sonic anemometer is ideally suited to the measurement of air turbulence around bridges, buildings, wind turbine sites, building ventilation control systems, meteorological and flux measurement sites.

 

Key Features:

  • Operating Temperature -45°C to 80°C
  • Accuracy:
    • wind speed:  ±1% ( 5ms-1  to  35 ms-1 )
    • wind direction:  ±0.1° ( 1 ms-1 to 35 ms-1 )
  • Resolution:
    • wind speed: up to 0.01 ms-1
    • wind direction: up to 0.1°.

Rain Gauge

Rain gauge is a meteorological instrument for measuring the amount of precipitation (especially rainfall amounts) fallen during a given time interval at a certain location. 

 

Key Features:

  • Records up to 160 in. of rainfall at rates up to 12 cm (5 in.) per hour
  • Data-logging Rain Gauge system is battery powered
  • Easily collect rainfall, time, and duration data, as well as temperature when used with an optional solar radiation shield.

 

CSP-P1

Barometric Pressure Sensor Probe

Barometric pressure sensors measure fluctuations in the pressure exerted by the atmosphere. It is commonly used to indirectly measure variables such as fluid/gas flow, speed, water level, and altitude.

 

Key Features:

  • Measurement range is 660mb to 1070mb
  • Operating temperature range for this sensor probe is -40°C to 70°C
  • Supports up to 100m cable

 

CSP-T0.5

Temperature Sensor Probe

The CSP-T0.5 probe is a temperature logger that uses small footprint thermistors to offer highly accurate temperature measurements at a very affordable price compared to its market competitors. It is used in a variety of conditions such as monitoring temperature of vaccination, blood plasma, pharmaceuticals, foods, and shipping containers.

 

Key Features:

  • Measurement Range: – 45°C to + 85°C
  • Small footprint sensors for high accuracy
  • Supports up to 100m cable

CSP-H2 T0.2

Temperature and Relative Humidity Sensor Probe

The CSP-H2 T0.2 probe is relative humidity and temperature logger that use small footprint sensors to offer highly accurate temperature measurements. It is used in a variety of conditions such as monitoring relative humidity and temperature for vaccination, blood plasma, pharmaceuticals, foods, and shipping containers.

 

Key Features:

  • Measurement range:
    • -40°C to 85°C for Temperature
    • 0 to 100% for Relative Humidity
  • Operating temperature range for this sensor probe is – 30°C to + 70°C
  • Supports up to 100m cable

CSP-H2 P1 T0.2

Temperature, Relative Humidity and Barometric Pressure Sensor Probe

Barometric pressure sensors measure fluctuations in the pressure exerted by the atmosphere. It is commonly used to indirectly measure variables such as fluid/gas flow, speed, water level, and altitude.

 

Key Features:

  • Measurement range:
    • 600 to 1200mBar for pressure
    • -40°C to 85°C for Temperature
    • 0 to 100% for Relative Humidity
  • Operating temperature range for this sensor is -40°C to 85°C
  • Supports up to 100m cable